Atusiff

I'm just going about my day, decided I'd hop in chat to do a friendly 3v3 with a friend. I send an invite and oop, Invitation Declined. He's online and is also trying to send me a 3v3 invite, but it almost never works. I see no reasoning to this, just chance. This has been an issue for a while and some have accepted it while others have not. 
Yes, we both have invites enabled. 

snow

I think the base are quite good for me.
after the gold mine finished my gold amount are always increase.
and if much farming you will get many item (food) for upgrade.
spend 2 factory for power kit and another 2 for legendary.
you will have power kit for upgrade and have a chance for legendary card.
This is only my opinion!
Dont believe until you can proof.😁
 
 

I am WinzKay

Merry christmas everyone! I hope yall have a great day and get a lot of presents!

hey, i'm WindForge, i'm a 15 years old guy and i live in Quebec (Canada). I'm playing SuperMechs since the end of 2017. I also have a SuperMechs Youtube channel: https://www.youtube.com/channel/UCzsrFcyccu1FN3fBvpNDJnA
 
if you have any questions about me write them down below!
 
🙂

Platform: iOS
So this has been happening for awhile. I play SM for about an hour (doing campaign, arena, or whatever) and at a certain point in time, the framerate goes from 50 to 1 and eventually crashes the app. The only way to remedy this is to just force-close and restart the app, but obviously this is annoying and just breaks the vibe.
I learned to anticipate the drop when I see a minor frame lag (hard to describe, but it's a half-second lag before it turns back to normal), but this shouldn't be the normal way to play... right?

Its a titan, its a rather sad story. It was originally born in a family of ultraspades but it was always a bit different. One day the first tentacle grew and... well, he was an outcast.
 
But he’s learned the value of love now. He’s become a good mech.

Sense this is the real one (I guess) I'll re-post my drop today:

# What's up Pilots!
With a new Forum, comes a new Flex Thread 👏
I call this one Flex Thread: The Revival. 
I hope this new series continues to be as popular as the same beloved Flex Thread in the old forum 😄
The new layout will take a while to get used to and I"m not sure it's suitable for a flex thread but here we go again :)))))))

one for the veterans

 
 
 

Welcome to the new forum John... Yea, a late reply...

Welcome bro!! I’m sorry I’m outta reactions for the day but I’m glad to see you on the new forums 😊

Supermechs has always been super vague on its story. What we know it that the octopus robot attacks on what we know it earth, and we fight it with robots. But where did the enemy come from?, What do the buildings and ruins mean in the backround?, Post your ideas and lore!

Hello and welcome to this Sprite making guide in Adobe Animate (/Flash) .
Here you should be able to find all the information required to make your very own sprite. If you need any further help please feel free to leave a reply at the bottom of the thread.
 
The Setup (Elcent)
Firstly you will need to acquire a copy of Adobe Animate (older versions are called Adobe Flash)
If you are unsure how to get it give it a quick google.
If you wish to have a look at other peoples work and perhaps make remixes of them please feel free to down load the files from the Sandbox Thread. LINK HERE However these aren’t needed to make your own from scratch.
Once you have opened Adobe Flash you will want to create a new AIR for Desktop file with the rough size of 550x400 pixels. This size doesn’t matter too much but allows you space to create your drawing nicely.
image.png831×512 17.7 KB     Line Defaults (KilliN)
HEX Color: #000000
Alpha: 30%
Height: 0.10

 
Colouring examples (Zarkares)
 
Part1.png766×416 9.41 KB Part1.png766×416 17.4 KB Part1.png766×416 18 KB  
Gradients (Killin)

Gradients.png526×512 76.4 KB  
Perspectives (Zarkares)
Part1.png766×416 11.2 KB Part1.png766×416 5.57 KB Part1.png766×416 15.7 KB Part1.png766×416 12.6 KB Part1.png766×416 26.5 KB Part1.png766×416 14.7 KB Part1.png766×416 12 KB Part1.png1487×807 49.6 KB Part1.png1487×807 23.1 KB Part1.png1487×807 17.9 KB  
Library Feature (Xzyckon)
 
What
The library is where all of the symbols, movie clips and other assets are stored within the fla file.
How
To use the library you need to convert something into a symbol. This is very straight forward; highlight the sprite you want to convert in it’s entirety, right click and select “Convert to Symbol…”, you can alternatively press the F8 key to achieve this. After that a window should pop up like this…

You want to make sure it is set to ‘Graphic’, this will allow you to edit the sprite after it has been converted. Once that’s out of the way enter a desired name for your asset and hit ‘OK’.
You will notice that your asset is now selected with a cyan hitbox that you can only manipulate as if you were using the Free Transform Tool. This is because the line work and fills are now stored within the new symbol you have created. You can drag and drop symbols into the scene as you wish, to edit the line work and such of the sprite itself simply right click on the symbol in the library and then click ‘Edit’.
Why
Generally speaking, the reason why you want to use the library is to organise your assets. If you just use the scene canvas to make and store your sprites you will soon find out that it becomes a memory hog, slowing the program down until it becomes unusable or maybe even unstable.
 
A big thank you to Killin, Zarkares and Xzyckon for contributing to this guide. 

On a scale of 1 to 10,how lonely are you?
Me:

A forum!

I have got to say, that is the best profile picture in the entire community right now.